POLYURETHANE COATINGS

MCU 85 is the ideal top coat for Metallic FX, Rapid Cast and other epoxy floors and countertops! Features a high 85% solids, low viscosity formula with excellent open time that results in a smooth, glossy surface with superior hardness, chemical resistance and UV stability. User friendly, single component, no odor and low VOC.

MCU 85 NO
ODOR URETHANE

  • Single Component

  • Solvent Based 85% Solids Content

  • No odor

  • Chemical Resistant & High Gloss

6100 WB Matte Urethane concrete coating is a high solids, matte finish, two component water based aliphatic polyurethane.  This high performance material has excellent hardness, abrasion resistance, hot tire resistance, chemical resistance, low VOC, and low odor with multiple uses.

6100 WB MATTE
FINISH URETHANE

  • Water Based Polyurethane

  • 56% Solids Content

  • Chemical Resistant & Matte Finish

  • Two Component - 2:1 Mix Ratio

Low voc concrete coating, 60 aliphatic urethane topcoat.

60 ALIPHATIC (250 VOC)

  • Solvent Based Polyurethane

  • 60% Solids Content - 250 VOC

  • Chemical Resistant & High Gloss

  • Two Component - 2:1 Mix Ratio

MCU 55, 55% solids, low viscosity formula with excellent open time that results in a smooth, glossy surface with superior hardness, chemical resistance and UV stability. MCU 55 is user friendly, single component and low VOC

MCU 55

  • Single Component

  • Solvent Based 55% Solids Content

  • Chemical Resistant & High Gloss

  • Moisture Cured Urethane

Poly 250 is a UV Resistant, specially formulated, two component, low viscosity acrylic urethane. This product provides a tough, scratch resistant, high gloss protective coating for interior and exterior use. Provides high gloss, abrasion resistant finish. Superior UV stability outperforms many similar products on today’s market.

POLY 250 (250 VOC)

  • Solvent Based Acrylic Polyurethane

  • 51% Solids Content - 250 VOC

  • Economical & High Gloss

  • Two Component - 4:1 Mix Ratio

urapack-s, Surfkoats solvent based two component urethane color pack system, 18 colors available.

URAPACK-S

  • Solvent Based Urethane Color Pack

  • For 60 Aliphatic & Poly 250

  • Excellent Opacity Qualities

  • 18 Color Options - Kolour Koat

6000 WB Gloss Urethane is a high gloss, two component water based aliphatic polyurethane with excellent color enhancement properties. 6000 WB Gloss Urethane has excellent adhesion and hardness properties as well as abrasion, hot tire, and chemical resistance. 6000 WB Gloss Urethane is low VOC and low odor with multiple uses.

6000 WB GLOSS
FINISH URETHANE

  • Water Based Polyurethane

  • 40% Solids Content

  • Chemical Resistant & High Gloss

  • Two Component - 4:1 Mix Ratio

Poly 250 concrete coating, UV Resistant, two component, low viscosity acrylic urethane. Superior UV stability out performs many similar products.

POLY 250

  • Solvent Based Acrylic Polyurethane

  • 51% Solids Content

  • Economical & High Gloss

  • Two Component - 4:1 Mix Ratio

Surfkoat, Polyrez water based tint pack for 6000 wb gloss urethane.

URAPACK-WB

  • Water Based Urethane Color Pack

  • For 6000 WB Gloss Urethane

  • Excellent Opacity Qualities

  • 6 Color Options - Kolour Koat

 
White aluminum oxide additive for surfkoat high performance concrete coatings such as mcu 85, epoxy, and polyaspartic topcoats.

HIGH WEAR ADDITIVE

  • Add up to 3 lbs. per gallon to film forming coatings

  • Creates an extremely durable surface for heavy traffic areas

  • Excellent for adding traction in high risk areas

  • Delivers an unmatched top coat when combined with MCU 85

  • 220 mesh white aluminum oxide

High Wear Ultra Fine is a 1200 grit, white aluminum oxide additive for use in urethanes, polyaspartics and epoxy gloss coatings. Using High Wear Ultra Fine in the wear surface of your coated floor will improve the traction, durability and wear resistance of the top coat.

HIGH WEAR ULTRA FINE

  • Add one container (1/4 lb) per gallon

  • Increases traction & durability of gloss top coats

  • Almost zero gloss loss

  • 1200 mesh white aluminum oxide

Surfkoat Universal Antimicrobial Additive is a liquid additive for most film forming sealers and coatings to protect against organic growth on the coated or sealed surface. It has superior resistance to bacteria, molds & algae as well as weather resistance for long term protection. Universal Antimicrobial Additive can be added to any SurfKoat sealer or coating with the exception of MCU 55 and MCU 85 No Odor.

UNIVERSAL ANTIMICROBIAL ADDITIVE

  • Concentrated Formula

  • 1 Bottle per 5 Gallons of Coating

  • Works in Solvent Based and Water Based Coatings & Sealers

Find a decorative concrete supplier near you call 615-323-9461. You can find a supplier for Tennessee, Kentucky, Texas, Kansas, Ohio, Illinois, Michigan