top of page

ASSORTED PRODUCTS

Surkoat, Antique Liquid Release is a bubble gum scented colorless liquid release agent specially formulated as a bond breaker between freshly poured concrete and decorative tools such as stamp mats, texture skins, stencils, etc. It creates a lubricating barrier that extends the life of the texturing tools by decreasing the friction between the concrete and the tools. Antique Liquid Release evaporates leaving no residue behind, meaning less clean up and labor cost. This characteristic makes it perfect for both exterior and interior applications.

ANTIQUE RELEASE AGENT

  • Stamp & Stencil Release Agent

  • Colorless Formulation

  • Bubble Gum Scented

  • Creates Barrier Between Concrete & Tools​

Technical Data Sheet
Coverage Calculator
surfkoat Resin Bond is a concentrated acrylic polymer admixture resin designed for cement based products and as a binder for coatings over cement substrates. Resin Bond offers improved flow and good workability with cement products. It has good open time and provides excellent adhesion and water resistance, in both interior and exterior applications. Resin Bond exceeds bond strength requirements per ASTM C-1059 91 Standard Specification For Latex Bonding Agents.

RESIN BOND

  • Resin Polymer Admixture

  • 50% Solids Concentrated Formulation

  • Superior Bonding Properties

  • Exceeds ASTM C-1059-91

Technical Data Sheet
surfkoat Surf-Grip is a micronized polymer specially designed for added grip, slight loss of gloss, and fine texturing in solvent based acrylic concrete coatings, paints, etc. Because of Surf-Grips high solvent resistance and very low oil absorption, it will stir into solvent based acrylic coatings easily without noticeably changing the sealers viscosity. Suspension is a key characteristic of Surf-Grip due to its low density, even in very low viscosity coatings.

SURF GRIP

  • Anti-Skid Coating Additive

  • Excellent Slip Resistance

  • Great for Sealers, Epoxy, & Urethanes

  • Available in Multiple Mesh Sizes

Technical Data Sheet
Surkoat Balance is a superior blend of neutralizing agents and specialty additives which create a solution unmatched in the industry. Balance neutralizes Acid Stains and acid based prep and cleaning products used on concrete, such as muriatic acid. A concrete surface with a neutral pH level is required for coatings to properly adhere to the concretes' surface. Balance neutralizes the surface, and also contains a special additive which results in excellent coating adhesion, and enhanced acid stain applications.

BALANCE

  • Acid Neutralizing Agent

  • Ready to Use Formulation

  • Cherry Scented

  • Very Economical to Use

Technical Data Sheet
Coverage Calculator
surfkoat Surf Film is a mono-molecular liquid specially formulated to reduce surface moisture evaporation in adverse conditions. Surf Film is light purple in color to allow for easy identification of applied areas and to ensure appropriate uniform coverage. Virtually eliminates the need to add extra water to compensate for rapid evaporation during the finishing process that can cause wind crusting, plastic shrinkage cracking, and poor surface texture.

SURF FILM

  • Surface Evaporation Retarder

  • Ready to Use Formulation

  • Prevents Rapid Moisture Loss

  • Reduces Plastic Shrinkage & Cracking

Technical Data Sheet
Coverage Calculator
Surfkoat Matte 50 is an easy to use, pourable, concentrated liquid Matting Agent Additive for post addition to solvent based acrylic sealers to reduce gloss levels. Satin or Matte finish Gloss levels are easily achieved by adding Matte 50. Matte 50 has ZERO VOC's and meets all applicable EPA Voc Regulations throughout the United States.

MATTE 50

  • Solvent Based Matting Agent

  • Concentrated Easy Mix Formula

  • Satin Finish - 1 Pack per 5 Gallons

  • Matte Finish - 2 Packs per 5 Gallons

Technical Data Sheet
Surfkoat Resin Bond 25 is a ready to use acrylic polymer admixture resin designed for cement based products and as a binder for coatings over cement substrates. Resin Bond 25 offers improved flow and good workability with cement products. It has good open time and provides excellent adhesion and water resistance, in both interior and exterior applications. Resin Bond 25 exceeds bond strength requirements per ASTM C-1059 91 Standard Specification For Latex Bonding Agents.

RESIN BOND 25

  • Resin Polymer Admixture

  • Ready to Use Formulation

  • Superior Bonding Properties

  • Exceeds ASTM C-1059-91

Technical Data Sheet
surfkoat Surf Film concentrate is a highly concentrated mono-molecular liquid specially formulated to reduce surface moisture evaporation in adverse conditions. Surf Film is light purple in color to allow for easy identification of applied areas and to ensure appropriate uniform coverage. Virtually eliminates the need to add extra water to compensate for rapid evaporation during the finishing process that can cause wind crusting, plastic shrinkage cracking, and poor surface texture. Dilutes 1:11 with clean water.

SURF FILM CONCENTRATE

  • Surface Evaporation Retarder

  • Concentrated Formulation

  • Prevents Rapid Moisture Loss

  • Reduces Plastic Shrinkage & Cracking

Technical Data Sheet
Coverage Calculator
Surface Aid is made up of a strong blend of aromatic and ketone solvents and surfactants. It is used to restore heavily coated existing solvent based acrylic concrete sealers that have started to soften, fade, peel, crack, delaminate, and deteriorate. Surface Aid also clears up white spots or blushing due to moisture content issues. Surface Aid melts the heavily coated existing solvent based acrylic concrete sealer, and helps restore the original appearance without adding more acrylic to allow the sealer to wear off naturally over time without stripping the existing bulk of the coating

SURFACE AID

  • Solvent Blend Thinner

  • Cures Blushing

  • Easily Melts Down Sealer

  • Sprayable, Quick Drying Formula

Technical Data Sheet
Coverage Calculator
bottom of page