top of page

ADDITIVE PRODUCTS

surfkoat High Wear Ultra Fine is a 1200 grit, white aluminum oxide additive for use in urethanes, polyaspartics and epoxy gloss coatings. Using High Wear Ultra Fine in the wear surface of your coated floor will improve the traction, durability and wear resistance of the top coat. Depending on dosage and spread rate it improves the slip resistance of the surface with almost zero loss of gloss.

HIGH WEAR ULTRA FINE

  • Add one container (1/4 lb) per gallon

  • Increases traction & durability of gloss top coats

  • Almost zero gloss loss

  • 1200 mesh white aluminum oxide

Coverage Calculator
Technical Data Sheet
Surfkoat Surf-Grip is a micronized polymer specially designed for added grip, slight loss of gloss, and fine texturing in solvent based acrylic concrete coatings, paints, etc. Because of Surf-Grips high solvent resistance and very low oil absorption, it will stir into solvent based acrylic coatings easily without noticeably changing the sealers viscosity. Suspension is a key characteristic of Surf-Grip due to its low density, even in very low viscosity coatings.

SURF GRIP

  • Anti-Skid Coating Additive

  • Provides Superior Slip Resistance

  • Great for Concrete Sealers, Epoxy coatings, & Urethanes

  • Available in Multiple Mesh Sizes

Coverage Calculator
Technical Data Sheet
Surfkoat High Wear Additive is a 220 grit, white aluminum oxide additive for use in urethanes, polyaspartics and epoxies. Using High Wear Additive in the wear surface of your coated floor will improve the durability and wear resistance of the top coat. Depending on dosage and spread rate, High Wear Additive can also improve the slip resistance of the surface.

HIGH WEAR ADDITIVE

  • Add up to 3 lbs. per gallon to film forming coatings

  • Creates an extremely durable surface for heavy traffic areas

  • Excellent for adding traction in high risk areas

  • Delivers an unmatched top coat when combined with MCU 85

  • 220 mesh aluminum oxide

Coverage Calculator
Technical Data Sheet
Surfkoat Matte 50 is an easy to use, pourable, concentrated liquid Matting Agent Additive for post addition to solvent based acrylic sealers to reduce gloss levels. Satin or Matte finish Gloss levels are easily achieved by adding Matte 50. Matte 50 has ZERO VOC's and meets all applicable EPA Voc Regulations throughout the United States.

MATTE 50

  • Solvent Based Concrete Sealer Matting Agent

  • Concentrated Easy Mix Formula

  • Satin Finish - 1 Pack per 5 Gallons

  • Matte Finish - 2 Packs per 5 Gallons

Coverage Calculator
Technical Data Sheet
Surfkoat Epoxy Accelerator is a special additive for use with 250 HP Cyclo 100% Epoxy and Maxx Flow 100% Solids Epoxy to accelerate the cure rate and allow for coating application at lower temperatures. It is an excellent option to speed up base coats for time sensitive applications.

EPOXY ACCELERATOR

  • Effectively cuts cure times in half

  • Add no more than one container to 3 gallons of Epoxy

  • Liquid formula that easily mixes into 100% solids Epoxy

  • Very useful in cooler climate applications

Coverage Calculator
Technical Data Sheet

Find additive products near you in, Tennessee Texas Kentucky Kansas Ohio Illinois Michigan

bottom of page