Water Repellents Concrete Products, Water Repellent Coatings

Water Repellents

Enhancer Shield WB

Enhancer Shield
  • Water Based Silicone
  • Enhances Color
  • No Change in Slip Coefficient
  • Low VOC

ENHANCER SHIELD WB is an active water-based silicone water repellent and impregnating agent for porous masonry surfaces such as concrete, block, brick, and unglazed tile. CLEAR application that enhances colored and stained concrete, decorative stones, pavers and cementitious overlays with no film build! ENHANCER SHIELD WB penetrates and chemically bonds deep within the substrate to provide long lasting protection against deterioration or staining due to water conditions.

Enhancer Shield SB

Enhancer Shield SB
  • Solvent Based Silicone
  • Enhances Color
  • No Change in Slip Coefficient
  • Low VOC

ENHANCER SHIELD SB is an active solvent-based silicone water repellent and impregnating agent for porous masonry surfaces such as concrete, block, brick, and unglazed tile. CLEAR application that enhances colored and stained concrete, decorative stones, pavers and cementitious overlays with no film build! ENHANCER SHIELD SB penetrates and chemically bonds deep within the substrate to provide long lasting protection against deterioration or staining due to water conditions.

Surf Guard SB 20

Surf Guard SB
  • Solvent Based Silane
  • 20% Active solids Content
  • Excellent Long Term Repellency
  • VOC Compliant Formula

SURF GUARD 20 - Surf-Guard SB-20 is a 20% active solvent-based silane water repellent and impregnating agent for porous masonry surfaces such as concrete, block, brick, and unglazed tile. Surf-Guard SB-20 will penetrate and chemically bond deep within the substrate to provide long lasting protection against deterioration or staining due to water conditions. Surf-Guard SB-20 will not impair the natural breathing characteristics of treated substrates, nor will it produce a film. Surf-Guard SB-20 will help concrete and masonry surfaces to resist common issues such as cracking, efflorescence, spalling, staining, and other damages caused by intrusion of water. It also helps protect the surface from damaging effects of water intrusion, acid rain, de-icing chemicals and freeze/thaw exposure.

Surf Guard SB 40

Surf Guard SB
  • Solvent Based Silane
  • 40% Active solids Content
  • Excellent Long Term Repellency
  • VOC Compliant Formula

Surf-Guard SB-40 is a 40% active solvent-based silane water repellent and impregnating agent for porous masonry surfaces such as concrete, block, brick, and unglazed tile. Surf-Guard SB-40 will penetrate and chemically bond deep within the substrate to provide long lasting protection against deterioration or staining due to water conditions. Surf-Guard SB-40 will not impair the natural breathing characteristics of treated substrates, nor will it produce a film. Surf-Guard SB-40 will help concrete and masonry surfaces to resist common issues such as cracking, efflorescence, spalling, staining, and other damages caused by intrusion of water. It also helps protect the surface from damaging effects of water intrusion, acid rain, de-icing chemicals and freeze/thaw exposure.

Surf Guard SB 60

Surf Guard SB
  • Solvent Based Silane
  • 60% Active solids Content
  • Excellent Long Term Repellency
  • VOC Compliant Formula

Surf-Guard SB-60 is a 60% active solvent-based silane water repellent and impregnating agent for porous masonry surfaces such as concrete, block, brick, and unglazed tile. Surf-Guard SB-60 will penetrate and chemically bond deep within the substrate to provide long lasting protection against deterioration or staining due to water conditions. Surf-Guard SB-60 will not impair the natural breathing characteristics of treated substrates, nor will it produce a film. Surf-Guard SB-60 will help concrete and masonry surfaces to resist common issues such as cracking, efflorescence, spalling, staining, and other damages caused by intrusion of water. It also helps protect the surface from damaging effects of water intrusion, acid rain, de-icing chemicals and freeze/thaw exposure.

Surf Guard SB 100

Surf Guard SB
  • Solvent Based Silane
  • 100% Active solids Content
  • Excellent Long Term Repellency
  • VOC Compliant Formula

Surf-Guard SB-100 is a 100% active solvent-based silane water repellent and impregnating agent for porous masonry surfaces such as concrete, block, brick, and unglazed tile. Surf-Guard SB-100 will penetrate and chemically bond deep within the substrate to provide long lasting protection against deterioration or staining due to water conditions. Surf-Guard SB-100 will not impair the natural breathing characteristics of treated substrates, nor will it produce a film. Surf-Guard SB-100 will help concrete and masonry surfaces to resist common issues such as cracking, efflorescence, spalling, staining, and other damages caused by intrusion of water. It also helps protect the surface from damaging effects of water intrusion, acid rain, de-icing chemicals and freeze/thaw exposure.

Hold Out™

Hold-out
  • Water Based Siliconate
  • Sprayable & Deep Penetration
  • No Color Change to Surface
  • VOC Compliant Formula

HOLD OUT- Hold Out™ is a reactive, penetrating catalyzed potassium siliconate solution that fuses within porous substrates of concrete, brick, stone, and mortar to combat freeze/thaw damage, scaling and spalling, and limit penetration of stains and damaging impurities such as oil, gas, grease, and salt. Hold Out™ is breathable with minimal impact to traction coefficient. Hold Out™ creates a cross-linked insoluble methyl-silicone internal membrane that will wear away only if the substrate itself wears away below sealer penetration.

Surfblock WB-75

water-repellents-concrete-Surfblock-WB-75
  • Water Based Silane/Siloxane
  • 7.5% Active Solids Content
  • Excellent Water Repellency
  • Provides Natural Look

Surfblock WB-75 is a 7.5% active water-based siloxane/silane water repellent and impregnating agent for porous masonry surfaces such as concrete, block, brick, and unglazed tile. Surfblock WB-75 will penetrate and chemically bond deep within the substrate to provide long lasting protection against deterioration or staining due to water conditions. Surfblock WB-75 will not impair the natural breathing characteristics of treated substrates, nor will it produce a film.

Surfblock WB-75 will help concrete and masonry surfaces to resist common issues such as cracking, efflorescence, spalling, staining, and other damages caused by intrusion of water.

Surfblock WB-10

water-repellents-concrete-Surfblock-WB-10
  • Water Based Silane/Siloxane
  • 10% Active Solids Content
  • Excellent Water Repellency
  • Provides Natural Look

Surfblock WB-10 is a 10% active water-based siloxane/silane water repellent and impregnating agent for porous masonry surfaces such as concrete, block, brick, and unglazed tile. Surfblock WB-10 will penetrate and chemically bond deep within the substrate to provide long lasting protection against deterioration or staining due to water conditions.

Surfblock WB-10 will not impair the natural breathing characteristics of treated substrates, nor will it produce a film. Surfblock WB-10 will help concrete and masonry surfaces to resist common issues such as cracking, efflorescence, spalling, staining, and other damages caused by intrusion of water.

Surfblock SB-12

water-repellents-concrete-Surfblock-SB-12
  • Solvent Based Silane/Siloxane
  • 12% Active Solids Content
  • Excellent Water Repellency
  • Available in 400 & 600 VOC Content

Surfblock SB 12 - 600 VOC is a 12% active solvent-based siloxane/silane water repellent and impregnating agent for porous ma-sonry surfaces such as concrete, block, brick, and unglazed tile. Surfblock SB 12 - 600 VOC will penetrate and chemically bond deep within the substrate to provide long lasting protection against deterioration or staining due to water conditions. Surfblock SB 12 - 600 VOC will not impair the natural breathing characteristics of treated substrates, nor will it produce a film.

Surfblock SB 12 - 600 VOC will help concrete and masonry surfaces to resist common issues such as cracking, efflorescence, spalling, staining, and other damages caused by intrusion of water. It also helps protect the surface from damaging effects of water intrusion, acid rain, deicing chemicals and freeze/thaw exposure.

concrete floor sealer products
concrete stain products
concrete floor coating products
concrete floor polishing