High Performance Concrete Coatings, Concrete Finishing Products

High Performance

Rapid Set 100

rapid-set-100-2-gal-kit
  • Fast Setting
  • Two Component - 1:1 Mix Ratio
  • Ultra Low Viscosity
  • Works Well In Cool Temperatures

Rapid Set 100 is a very fast setting, high strength ultra low viscosity concrete repair material. This two-part, hybrid urethane system is designed for rapidly rebuilding deeply spalled or damaged concrete surfaces, broken control joints and repairing damaged concrete rapidly, even in cold conditions. Rapid Set 100 can accept heavy loads in 10 - 15 minutes.

1040 Bond Koat

concrete-coatings-1040-Bond-Koat
  • Water Based Epoxy
  • 40% Solids Content
  • High Gloss & Low VOC's
  • Two Component - 1:1 Mix Ratio

1040 Bond Koat is a specially formulated, low odor, two component, water based epoxy primer for interior use.

This product provides excellent substrate penetration and is a suitable primer for most epoxies, urethanes, polyureas and polyaspartic polyureas.

1055 Seal Koat

concrete-coatings-1055-Seal-Koat
  • Water Based Epoxy
  • 55% Solids Content
  • High Gloss & Low VOC's
  • Two Component - 2:1 Mix Ratio

1055 Seal Koat is a specially formulated, low odor, two component, epoxy sealer for interior use that rivals solvent based products.

This product provides fast cure times, superior chemical resistance, abrasion resistance, substrate penetration and hot tire pick up resistance.

MVB 100

MVB 100
  • Reduces water vapor transmission through concrete substrates
  • High solids epoxy primer system
  • Excellent base coat for epoxies and urethanes
  • VOC compliant formula

MVB 100 is a high performance epoxy primer system designed to reduce water vapor transmission. When applied to properly prepared concrete, MVB 100 has shown to have improved adhesion to concrete surfaces where moisture is an issue and other high performance coatings have failed.

250 HP Cyclo Epoxy

concrete-coatings-250-HP-Cyclo-Epoxy
  • High Build Epoxy
  • 100% Solids Content
  • High Gloss Build & Low VOC's
  • Two Component - 2:1 Mix Ratio

250 HP Cyclo is a 100% solids, two component, cyclo-aliphatic amine epoxy system with excellent durability including abrasion resis-tance, chemical resistance and hot tire resistance.

250 HP Cyclo is a user friendly high performance concrete flooring system.

60 Aliphatic Urethane

concrete-coatings-60-Aliphatic-Urethane
  • Solvent Based Urethane
  • 60% Solids Content
  • High Gloss & Chemical Resistant
  • Two Component - 2:1 Mix Ratio

60% Aliphatic Urethane is a two component aliphatic polyurethane coating with excellent abrasion resistance, chemical resistance, hot tire resistance and UV Stability.

A60% Aliphatic Urethane is designed as a high performance topcoat for concrete flooring systems.

Poly 250 Acrylic Urethane

concrete-coatings-Poly-250-Acrylic-Urethane
  • Solvent Based Acrylic Urethane
  • 51% Solids Content
  • High Gloss & Chemical Resistant
  • Two Component - 4:1 Mix Ratio

Poly 250 Clear Urethane is a UV Resistant, specially formulated, two component, low viscosity acrylic urethane. This product provides a tough, scratch resistant, high gloss protective coating for interior and exterior use. Benefits & Features: Provides high gloss, abrasion resistant finish. Superior UV stability outperforms many similar products on today’s market.

6100 WB Matte Urethane

concrete-coatings-6100-WB-Urethane
  • Water Based Urethane
  • 56% Solids Content
  • Matte Finish & Low VOC's
  • Two Component - 2:1 Mix Ratio

6100 WB Urethane MT is a high solids, matte finish, two-component water based aliphatic polyurethane.

This high performance mate-rial has excellent hardness, abrasion resistance, hot tire resistance, chemical resistance, low VOC, and low odor with multiple uses.

MCU 45 400 VOC

concrete-coatings-MCU-45-400-VOC
  • Solvent Based Urethane
  • 45% Solids Content
  • High Gloss & Chemical Resistant
  • Single Component - Moisture Cured

MCU 45 (400 VOC) is a Non-Yellowing, one component, low viscosity, moisture cured urethane. This product provides an extremely tough and durable film. It has a UV Absorber incorporated which makes it an excellent coating for interior and exterior use.

MCU 60 400 VOC

concrete-coatings-MCU-60-400-VOC
  • Solvent Based Urethane
  • 60% Solids Content
  • High Gloss & Chemical Resistant
  • Single Component - Moisture Cured

MCU 60 (400 VOC) is a Non-Yellowing, one component, low viscosity, moisture cured urethane. This product provides an extremely tough and durable film. It has a UV Absorber incorporated which makes it an excellent coating for interior and exterior use.

PolyKoat GL 70

concrete-coatings-PolyKoat-GL
  • Solvent Based Polyaspartic Polyurea
  • 70% Solids Content
  • High Gloss & Fast Curing
  • Two Component - 1:1 Mix Ratio

PolyKoat GL 70 is a new, stand above all, two-component Polyaspartic Aliphatic Polyurea utilizing innovative proprietary Nanotech-nology . It provides a high gloss clear coating. It's extremely quick curing time provides unmatched labor saving capabilities above epoxies and polyurethanes. PolyKoat GL can be used for most types of interior applications over properly prepared surfaces. It's superior penetration and bonding strength can provide years of abrasion, impact, and wear resistance.

PolyKoat GL 70 yields chemical splash and spill resistance and hot tire pick-up resistance much like it's epoxy counterpart. PolyKoat GL can be used easily in conjunction with quartz, chip, and rubberized aggregate systems.

PolyKoat GL 80

concrete-coatings-PolyKoat-GL-80
  • Solvent Based Polyaspartic Polyurea
  • 80% Solids Content
  • High Gloss & Fast Curing
  • Two Component - 1:1 Mix Ratio

Polykoat GL-80 is a new, stand above all, two-component Polyaspartic Aliphatic Polyurea utilizing innovative proprietary Nano-technology . It provides a high gloss clear coating. It's extremely quick curing time provides unmatched labor saving capabilities above epoxies and polyurethanes. Polykoat GL-80 can be used for most types of interior applications over properly prepared surfaces. It's superior penetration and bonding strength can provide years of abrasion, impact, and wear resistance.

Polykoat GL-80 yields chemical splash and spill resistance and hot tire pick-up resistance much like It's epoxy counterpart. Polykoat GL-80 can be used easily in conjunction with quartz, chip, and rubberized aggregate systems.

PolyKoat GL 80 Slow

concrete-coatings-PolyKoat-GL-80 Slow
  • Solvent Based Polyaspartic Polyurea
  • 80% Solids Content - High Gloss
  • Slow Curing for additional work time
  • Two Component - 1:1 Mix Ratio

PolyKoat GL 80 Slow Cure is a stand above all, two component polyaspartic aliphatic polyurea utilizing innovative proprietary nanotechnology. It provides a high gloss clear coating. Its superior penetration and bonding strength can provide years of abrasion, impact, and wear resistance. PolyKoat GL 80 Slow Cure yields chemical splash and spill resistance and hot tire pick-up resistance much like its epoxy counterpart.

PolyKoat GL 100

concrete-coatings-PolyKoat-GL-100
  • Solvent Based Polyaspartic Polyurea
  • 100% Solids Content - Low Odor
  • High Gloss & Fast Curing
  • Two Component - 1:1 Mix Ratio

PolyKoat GL-100 is a new, stand above all, two-component Polyaspartic Aliphatic Polyurea utilizing innovative proprietary Nanotechnology . It is UV stable and provides a high gloss clear coating. It's extremely quick curing time provides unmatched labor saving capabilities above epoxies and polyurethanes. PolyKoat GL-100 can be used for most types of interior and exterior applications over properly prepared surfaces. It's superior penetration and bonding strength can provide years of abrasion, im-pact, and wear resistance. PolyKoat GL-100 yields chemical splash and spill resistance and hot tire pick-up resistance much like it's epoxy counterpart.

PolyKoat GL-100 can be used easily in conjunction with quartz, chip, and rubberized aggregate systems.

concrete floor sealer products
concrete stain products
concrete floor coating products
concrete floor polishing