Decorative Concrete Floor Sealer Products from SURFKOAT™

Decorative Sealers

Deco Guard

decorative-concrete-sealers-Deco-Guard
  • Siloxane Modified Methyl Methacrylate Sealer
  • 15% Solids Content
  • Non-Yellowing & Low Sheen
  • VOC Compliant Formula

Deco Guard is recommended for use on new or existing Pool Decks, Stamped Concrete, Stenciled Concrete, Acid Stained Concrete, Overlaid Concrete, Exposed Aggregate Concrete, Broom Finish Concrete, and Trowel Finish Concrete. Other uses may be acceptable.

Deco Guard is a non-yellowing, low sheen, Siloxane Modified Methyl Methacrylate with a low viscosity for better pene- tration on concrete substrates. Deco Guard’s unique Siloxane Modified Methyl Methacrylate formulation provides supe- rior water and salt resistance compared to standard sealers used to protect exterior concrete.

Improved resistance to de-icing road salts, pool decks with salt water pool systems, rain, sleet and snow are achieved due to our advanced chemical reactive formula.

Deco Guard Plus

decorative-concrete-sealers-Deco-Guard-Plus
  • Siloxane Modified Methyl Methacrylate Sealer
  • 25% Solids Content
  • Non-Yellowing & High Gloss
  • VOC Compliant Formula

Deco Guard Plus is recommended for use on new or existing Pool Decks, Stamped Concrete, Stenciled Concrete, Acid Stained Concrete, Overlaid Concrete, Exposed Aggregate Concrete, Broom Finish Concrete, and Trowel Finish Concrete.

Deco Guard Plus is a non-yellowing, high gloss, Siloxane Modified Methyl Methacrylate with excellent adhesion to un-sealed or untreated, clean concrete substrates. Deco Guard Plus’s unique Siloxane Modified Methyl Methacrylate for-mulation provides superior water and salt resistance compared to standard sealers used to protect exterior concrete.

Improved resistance to de-icing road salts, pool decks with salt water pool systems, rain, sleet and snow are achieved due to our advanced chemical reactive formula.

Deco Guard WB

decorative-concrete-sealers-Deco-Guard-wb
  • Siloxane Modified Water Based Acrylic Sealer
  • 15% Solids Content
  • Non Yellowing & Low Sheen
  • VOC Compliant Formula

Deco Guard WB is a non-yellowing, low sheen, siloxane modified water based acrylic sealer with a low viscosity for better penetration on concrete substrates. Deco Guard WB’s unique chemical reactive formulation provides superior resistance to de-icing road salts, salt water pool systems, rain, sleet and snow compared to standard water based sealers used to protect interior and exterior concrete.

2000 Supreme

decorative-concrete-sealers-2000-Supreme
  • Solvent Based Pure Acrylic Sealer
  • 25% Solids Content
  • Non-Yellowing & Medium Sheen
  • Ultra Low Viscosity

2000 Supreme is a penetrating, non-yellowing, pure acrylic concrete sealer designed for all types of concrete. 2000 Supreme offers improved resistance to rain, the sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete. Applying 2000 Supreme to exposed ag-gregate will also help to eliminate loose pebbles and premature wear.

2000 Supreme can be considered an ultimate multi-use concrete sealer.

Stamp Seal

decorative-concrete-sealers-Stamp-Seal
  • Solvent Based Pure Acrylic Sealer
  • Low 18% Solids Content
  • Non-Yellowing & Medium Sheen
  • Fast Drying Laquer

Stamp Seal is a medium gloss, fast dry, non-yellowing, penetrating, pure acrylic concrete lacquer style sealer designed for decorative concrete. Stamp Seal offers improved resistance to rain, the sun, freez-ing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete.

Applying Stamp Seal to exposed aggregate will also help to eliminate loose pebbles and premature wear.

Stamp Seal Xtreme Gloss

decorative-concrete-sealers-Stamp-Seal-Xtreme-Gloss-4
  • Solvent Based Pure Acrylic Sealer
  • 30% Solids Content
  • Non-Yellowing & High Gloss
  • Fast Drying Lacquer

Stamp Seal “Xtreme Gloss” is an ultra high gloss, fast drying, non-yellowing, pure acrylic concrete sealer designed for decorative concrete. Stamp Seal “Xtreme Gloss” offers improved resistance to rain, the sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete.

Applying Stamp Seal “Xtreme Gloss” to exposed aggregate will also help to eliminate loose pebbles and prema-ture wear.

Stamp Seal Gloss

decorative-concrete-sealers-Stamp-Seal-Glass
  • Solvent Based Pure Acrylic Sealer
  • 25% Solids Content
  • Non-Yellowing & High Gloss
  • Fast Drying Lacquer

Stamp Seal Gloss is a high gloss, fast drying, non-yellowing, pure acrylic concrete lacquer style sealer designed for decorative concrete. Stamp Seal Gloss offers improved resistance to rain, the sun, freezing tempera-tures, stains, and other pollutants that sometimes can be hazardous to concrete. Applying Stamp Seal Glass to ex-posed aggregate will also help to eliminate loose pebbles and premature wear.

Stamp Seal Gloss offers improved resistance to rain, sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete.

Luster Shield

decorative-concrete-sealers-Luster-Shield
  • Solvent Based Acrylic Copolymer
  • 25% Solids Content
  • Non-Yellowing & High Gloss
  • Meets Cure & Seal Specifications

Luster Shield is a high gloss, UV Resistant acrylic copolymer concrete sealer intended for all types of concrete. Luster Shield offers improved resistance to rain, the sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete. With substrate wetting agents and anti-foaming additives included in this formulation, Luster Shield provides superior adhesion to properly prepared concrete.

Applying Luster Shield to exposed aggregate will also help to eliminate loose pebbles and premature wear. Luster Shield can be considered an ultimate multi-use concrete sealer. Meets ASTM Cure & Seal specs and is also an excellent Non-Yellowing protective coating for a variety of concrete uses.

Super Luster Shield

decorative-concrete-sealers-Super-Luster-Shield
  • Solvent Based Acrylic Copolymer
  • 30% Solids Content
  • Non-Yellowing & High Gloss
  • Meets Cure & Seal Specifications

Super Luster Shield is a super high gloss, UV Resistant acrylic copolymer concrete sealer intended for all types of con-crete. Super Luster Shield offers improved resistance to rain, the sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete. With substrate wetting agents and anti-foaming additives included in this formulation, Super Luster Shield provides superior adhesion to properly prepared concrete.

Applying Super Luster Shield to exposed aggregate will also help to eliminate loose pebbles and premature wear. Super Luster Shield can be consid-ered an ultimate multi-use concrete sealer.

MMA 25

decorative-concrete-sealers-MMA-25
  • Solvent Based Methyl Methacrylate
  • 25% Solids Content Ready to Use
  • Non-Yellowing & High Gloss
  • Better Chemical Resistance

MMA 25 is a ready to use 25% solids methyl methacrylate that provides a high gloss, fast drying, non-yellowing, sealer for most concrete applications. MMA 25 offers improved resistance to rain, the sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete.

MMA 25 can be considered an ulti-mate multi-use concrete sealer that has better chemical, weatherability and wear resistance than the normal acrylic sealers that are commonly used in the industry.

MMA 50

decorative-concrete-sealers-MMA-50
  • Solvent Based Methyl Methacrylate
  • 50% Solids Content Concentrated
  • Non-Yellowing & High Gloss
  • Better Chemical Resistance

MMA 50 is a concentrated 50% solids methyl methacrylate that can be diluted with solvents such as; xylene, toluene, aro-matic 100, or compatible exempt voc solvents such as acetone, T- Butyl Acetate or PCBTF to the desired solids content that provides a high gloss, fast drying, non-yellowing, sealer for most concrete applications. MMA 50 offers improved resis-tance to rain, the sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete.

MMA 50 can be considered an ultimate multi-use concrete sealer that has better chemical, weatherability and wear resis-tance than the normal acrylic sealers that are commonly used in the industry.

Infusion 44

decorative-concrete-sealers-Infusion-44
  • Water Based Epoxy Infused Acrylic
  • Low 18% Solids Content
  • Non-Yellowing & Medium Gloss
  • Contains Less than 100 g/L VOC's

INFUSION 44 is a non-yellowing, Water Based Epoxy-Acrylic designed for interior concrete sealing applications. INFUSION 44 is a penetrating breathable coating that provides a satin or low gloss finish to a multitude of interior horizontal or vertical concrete and ma-sonry finishes. INFUSION 44 is self-crosslinking, which provides better film formation, early water resistance, adhesion, toughness and outstanding efflorescence and alkali resistance.

It can be applied to green concrete. INFUSION 44 provides enhanced performance over traditional acrylics with better flexibility, chemical resistance, non-blushing, adhesion, durability and hot tire resistance.

Infusion 44 Gloss

decorative-concrete-sealers-Infusion-44-Gloss
  • Water Based Epoxy Infused Acrylic
  • High 32% Solids Content
  • Non-Yellowing & High Gloss
  • Contains Less than 100 g/L VOC's

INFUSION 44 “GLOSS” is a non-yellowing, Water Based Epoxy-Acrylic designed for interior concrete sealing applications. INFUSION 44 “GLOSS” is a high solids coating that provides a superior high gloss finish to a multitude of interior horizontal or vertical concrete and ma-sonry finishes. INFUSION 44 “GLOSS” is self-crosslinking, which provides better film formation, early water resistance, adhesion, tough-ness and outstanding efflorescence and alkali resistance. It can be applied to green concrete.

INFUSION 44 “GLOSS” provides enhanced performance over traditional acrylics with better flexibility, chemical resistance, non-blushing, adhesion, durability and hot tire resistance.

concrete floor sealer products
concrete stain products
concrete floor coating products
concrete floor polishing