Concrete Cure & Concrete Sealing Products from SURFKOAT™

Concrete Cure & Seals

Repel Cure

concrete-curing-concrete-sealing-product-repel-cure
  • Water Repelling Cure & Seal
  • Low Sheen - Natural Look Finish
  • Meets ASTM C-309, Type 1, Class A&B
  • Great for Broom Finished Concrete

Repel Cure is recommended for use on new or existing unsealed Pool Decks, Exposed Aggregate Concrete, Broom Finish Concrete, & other unsealed porous concrete & masonry surfaces. Other uses may be acceptable. Repel Cure is a dual functioning chemical reactive curing compound and water repellent with a low viscosity for bet-ter penetration on concrete substrates. Repel Cure’s unique formulation provides superior water and salt resistance com-pared to standard sealers used to protect exterior concrete. Improved resistance to de-icing road salts, salt water pool sys-tems, rain, sleet and snow are achieved with our advanced chemical reactive formula. Repel Cure also meets cure & seal specs ASTM C-309, Type 1, Class A & B, AASHTO Spec M-148, Type 1, Class A & B so it can be applied directly to fresh poured concrete after all surface water has dissipated.

Temp Cure

concrete-curing-concrete-sealing-product-temp-cure
  • Excellent moisture retention for proper curing
  • Protects slabs from construction dirt and stains
  • Economical and easy to apply with standard equipment

Temp-Cure is a clear, water based resin curing compound for concrete. Temp-Cure efficiently cures concrete and then decomposes rapidly when exposed to ultraviolet light, sunlight, and abrasion. It is a VOC compliant alternative to solvent based dissipating resin cures. Curing interior or exterior, horizontal or vertical concrete surfaces. Floors scheduled to receive subsequent treatments of dustproofers, liquid hardeners and densifiers or penetrat¬ing water repellents. Slabs designated for polymer coatings, such as epoxies or urethanes, paints, sealers, thin set mortars or floor covering adhesives. Walls where a waterproof or decorative coating will be applied.

2500 LV UV

concrete-curing-concrete-sealing-product-2500-LV-5GA
  • Solvent Based Cure & Seal
  • 25% Low Molecular Weight Resin
  • Non-Yellowing, Sprayable Formula
  • Workhorse Cure & Seal

2500 L.V. UV is a UV resistant, low viscosity 25% solids solvent based acrylic copolymer curing and sealing compound, as well as a dust-proofer for concrete surfaces. 2500 L.V. UV offers improved resis-tance to rain, the sun, freezing temperatures, stains, and other pollutants that sometimes can be hazard-ous to concrete.

2500 L.V. UV forms a moisture retentive film on freshly placed concrete.

2500 LV UV 350

concrete-curing-concrete-sealing-product-2500-LV-350-5GA
  • Solvent Based Cure & Seal
  • 25% Low Molecular Weight Resin
  • Non-Yellowing, Sprayable Formula
  • Contains Less Than 350 g/L VOC's

2500 L.V. 350 VOC UV is a VOC compliant, UV resistant, low viscosity 25% solids solvent based acrylic copolymer curing and sealing compound, as well as a dust-proofer for concrete surfaces. 2500 L.V. 350 VOC UV offers improved resistance to rain, the sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete. 2500 L.V. 350 VOC UV forms a moisture retentive film on freshly placed concrete.

2500 L.V. 350 VOC UV forms a moisture retentive film on freshly placed concrete.

Cure & Seal 309 UV

concrete-curing-concrete-sealing-product-cure-and-seal-309
  • Solvent Based Acrylic Copolymer
  • UV Resistant 15% Solids
  • Improved resistance to rain, the sun, freezing.
  • Dustproofing most concrete surfaces

Cure & Seal 309 UV is a low viscosity, UV resistant 15% solids solvent based acrylic copolymer curing and sealing compound, as well as a dust - proofer for concrete surfaces. Cure & Seal 309 UV offers improved resistance to rain, the sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete. Cure & Seal 309 UV forms a moisture retentive film on freshly placed concrete. Can be used as a means of dustproofing most concrete surfaces. It’s low viscosity formula makes this product very easy to spray. UV Resistant formulation yields long lasting non-yellowing results. It’s ease of use, low-medium gloss, and low cost make this a contractor’s favorite.

Cure & Seal 30 UV

concrete-curing-concrete-sealing-product-Cure-and-Seal-30-5GA
  • Solvent Based Cure & Seal
  • High Gloss 30% Solids Content
  • Non-Yellowing, Easy Roll-on Formula
  • Available in Low VOC Formula

Cure & Seal 30 UV is a UV resistant, high gloss, 30% solids solvent based acrylic copolymer curing and sealing compound, as well as a dust-proofer for concrete surfaces. Cure & Seal 30 UV offers improved re-sistance to rain, the sun, freezing temperatures, stains, and other pollutants that sometimes can be hazard-ous to concrete.

Cure & Seal 30 UV forms a superior moisture retentive film on freshly placed concrete.

Aqua Cure 15

concrete-curing-concrete-sealing-product-Aqua-Cure-5GA
  • Water Based Cure & Seal
  • Low Sheen 15% Solids Content
  • Non-Yellowing, Sprayable Formula
  • Contains Less than 100 g/L VOC's

AQUA CURE 15-100 is a low odor, low voc, non-yellowing, Water Based product designed for curing and sealing applications. AQUA CURE 15-100 is a breathable coating that provides a satin or low gloss finish to a multitude of interior & exterior horizontal or vertical concrete and masonry finishes. AQUA CURE 15-100 is self-crosslinking, which provides better film formation, early water resistance, adhesion, toughness and outstanding efflorescence and alkali resistance.

It can be applied to green concrete. AQUA CURE 15-100 provides enhanced performance over traditional acrylics with better flexibility, chemical resistance, non-blushing, adhesion, durability test.

Aqua Cure 18

concrete-curing-concrete-sealing-product-Aqua-Cure-18
  • Water Based Cure & Seal
  • Low Sheen 18% Solids Content
  • Non-Yellowing, Sprayable Formula
  • Contains Less than 100 g/L VOC's

AQUA CURE 18 - 100 is a non-yellowing, Water Based acrylic curing & sealing compound with less than 100 VOC. AQUA CURE 18 - 100 is a penetrating and breathable coating that provides a satin or low gloss finish to a multitude of interior & exterior horizontal or vertical concrete and masonry finishes. AQUA CURE 18 - 100 is self-crosslinking, which provides better film formation, early water re-sistance, adhesion, toughness and outstanding efflorescence and alkali resistance. It can be applied to green concrete.

AQUA CURE 18 - 100 provides enhanced performance over traditional acrylics with better flexibility, chemical resistance, non-blushing, adhesion, durability and hot tire resistance.

Aqua Cure 21

concrete-curing-concrete-sealing-product-Aqua-Cure-21
  • Water Based Cure & Seal
  • Low/Medium Sheen 21% Solids Content
  • Non-Yellowing, Sprayable Formula
  • Contains Less than 100 g/L VOC's

AQUA CURE 21 - 100 is a non-yellowing, Water Based acrylic curing & sealing compound with less than 100 VOC. AQUA CURE 21 - 100 is a penetrating and breathable coating that provides a satin or low gloss finish to a multitude of interior & exterior horizontal or vertical concrete and masonry finishes. AQUA CURE 21 - 100 is self-crosslinking, which provides better film formation, early water re-sistance, adhesion, toughness and outstanding efflorescence and alkali resistance.

It can be applied to green concrete. AQUA CURE 21 - 100 provides enhanced performance over traditional acrylics with better flexibility, chemical resistance, non-blushing, adhesion, durability and hot tire resistance.

Aqua Cure 25

concrete-curing-concrete-sealing-product-Aqua-Cure-25
  • Water Based
  • Medium/High Sheen 25% Solids Content
  • Non-Yellowing, Easy Roll-on Formula
  • Contains Less than 100 g/L VOC's

AQUA CURE 25-100 is a Low VOC, Low Odor, non-yellowing, Water Based product designed for curing and sealing applications. AQUA CURE 25-100 is a breathable coating that provides a medium gloss finish to interior and exterior horizontal or vertical concrete and masonry finishes. AQUA CURE 25-100 is self-crosslinking, which provides better film formation, early water resistance, adhesion, toughness and outstanding efflorescence and alkali resistance

It can be applied to green concrete. AQUA CURE 25-100 provides en-hanced performance over traditional acrylics with better flexibility, chemical resistance, non-blushing, adhesion, durability and hot tire resistance.

Aqua Cure 30

concrete-curing-concrete-sealing-product-Aqua-Cure-30
  • Water Based Cure & Seal
  • High Sheen 30% Solids Content
  • Non-Yellowing, Easy Roll-on Formula
  • Contains Less than 100 g/L VOC's

AQUA CURE 30 - 100 is a non-yellowing, Water Based acrylic curing & sealing compound with less than 100 VOC. AQUA CURE 30 - 100 is a penetrating and breathable coating that provides a satin or low gloss finish to a multitude of interior & exterior horizontal or vertical concrete and masonry finishes. AQUA CURE 30 - 100 is self-crosslinking, which provides better film formation, early water re-sistance, adhesion, toughness and outstanding efflorescence and alkali resistance.

It can be applied to green concrete. AQUA CURE 30 - 100 provides enhanced performance over traditional acrylics with better flexibility, chemical resistance, non-blushing, adhesion, durability and hot tire resistance.

concrete floor sealer products
concrete stain products
concrete floor coating products
concrete floor polishing